eobdtool

eobdtool
China National Day Promotion

2015-07-07

How to install Xhorse MINI VCI Toyota Techstream V10.10.018

Following are the new V10.10.018 Toyota Techstream software free download and step-by-step instruction guide provided. Toyota TIS Techstream V10.10.018 software can be free downloaded here:

O/S: Windows XP without any anti-virus software
Techstream cable:

How to install MINI VCI Toyota TIS Techstream 10.10.018?

1) Install Toyota Techstream-10.10.018.setup

Open and run MINI VCI 10.10.018 setup

Select Language, click “Next”
Install software wizard, click “Next”
Accept license agreement, click “Next”



Click “Next” in Customer Identification program
Click “Install” when “Ready to install the Program” message prompts
Install Wizard is completed, press “Finish”


2)      Activate Toyota TIS Techstream

Go to C:\Program Files\Toyota Diagnostics\Techstream\Env\IT3System.ini
Change
TISFunction=1 to
TISFunction=0
Click Ok
Save

3) Install MVCI Driver 2.0.1

Open “MVCI Driver folder”
Install “Mini-VCI Driver for TOYOTA-CABLE 2.0.1”
Click “Next” then “Install”
Click “Finish” when driver is installed.

4)      Com port setting

Open “My computer”>> “Device Manager” >> “USB Serial PORT (COM4)”
Make sure COM port is set to COM4

5) Run MVCI firmware update tool

Open “MVCI Firmware Update Tool” on the desktop
Click on “Device info” button to check device information, SN, firmware version etc


6) Configure Techstream 10.10.018

Open “Techstream” software on the desktop
Click “NO” to ignore pop-up Java message
Click “Setup” Tab>> “Tecshtream Configuration”
Select “Europe” in Area Selection windows, click “Next”


Select Tecshtream software language: English, click “Next”


7) Connect MINI VCI cable
Plug the Xhorse MINI VCI cable into the Toyota diagnostic socket
Click “Connect to Vehicle” in main menu
Initializing USB communication
After good communication is built, complete your vehicle information


Select system and carry out diagnostic function