Lonsdor K518ISE

Lonsdor K518ISE
Lonsdor K518ISE

2015-08-27

Easycoding for BMW Rolls-Royce Diagnosis & Personalized Setting

Easycoding V1.3.0.150407 is the newest advanced tool for BMW and Rolls-Royce cars that supports not only diagnosing but also personalized vehicle setting.


BMW Easycoding Scanner Operating System Requirement: WINDOWS XP SP3, WINDOWS 7 and WINDOWS 8.
BMW Easycoding Scanner PC Requirement: At least 2GB system RAM and 4GB HDD space.

BMW Easycoding Scanner personalized function:
personalized setting for: HU, ACSM, BDC, CAS, COMBOX, DWA8, FEM, FKA, FRM, FZD, IHKA, TCU, JBBFE, KOMBI, PMA, Radio, RSE and ULF systems.
Number Systems Function
1 HU 1. Add Select Sound Effects Of Lock/Unlock In I-drive
2. Operate Navigation Menu And Watch DVD During Driving 3. Enable Efficient Dynamics Sport CID (Added Sport Displays The Vehicle Info Screen (Power & Torque Meters)). 4. Disable iDrive Legal Disclaimer During iDrive Startup 5. Select Sports Mode In I-drive 6. Turn On Gasoline Station Alert In Navigator 7. Allow PDC(Park Distance Control) To Indicate Park Distance 8. Disable Daytime Running Lamps 9. Convert kilometers To Miles 10. Increase The FM band 11. Disable Handbrake To Play Videos 12. Disable Reversing camera warning window 13. Video Playing With USB Are Avaliable In 2013 NTB
2 ACSM Set seat belt alarm to last 10 seconds
3 BDC 1. Allow Car Windows To Roll Up Without Being Disturbed By Door Openings
2. Activate/Deactivate Headlight Washer 3. Set Car's Auto Start/Stop To Start In The Last Used Setting (e.g. Off) When The Engine Is Started
4 CAS 1. Central Control Unlock Automatically When Engine Is Off
2.  Shorten time to roll up or down car windows 3. Shorten The Time To Fold Down Rearview Mirrors
5 COMBOX 1. Voice recognition
2. Play Videos 3. Add CIC stored addresses/messages from 25 to 50 4. Mircophone Settings 5. Change and Synchronize Incoming Call Ringtones On Bluetooth Device
6 DWA8 Set lock alarm sound to the maximum
7 FEM 1. Allow car windows  to roll up without  being disturbed  by door  openings
2.  Clean head lamps 3. Set Car's Auto Start/Stop To Start In The Last Used Setting (e.g. Off) When The Engine Is Started
8 FKA AC Records Last Engine-off Statues
9 FRM 1. Remote Controller And Interior Button Turn Off Power Lift Gate(Reset After Engine Is Off For 15 Minutes )
2. Remote Controller And Interior Button Turn Off Power Lift Gate At Any Time(Reset After Engine Is Off For 15 Minutes ) 3. Auto Control Of High Beams 4. Extend Foot To Open Rear Cover
10 FZD Set Lock Alarm Sound To The Maximum
11 IHKA 1. AC Records Last Engine-off Statues
2. AC Indoor Circulation Records its Engine-off Statues
12 TCU Mircophone Settings
13 JBBFE 1. Allow car windows to  roll up without being  disturbed by door openings
2. Activate/Deactivate Headlight Washer 3. Wiper Resets Automatically  4. Disable Front Camera At Maximum Distance 5. Disable Back Camera At Maximum Distance
14 KOMBI Display Digital Vehicle Speed 
15 PMA 1. Disable Front Camera At Maximum Distance
2. Disable Back Camera At Maximum Distance 3. Disable Front Camera At Maximum Speed 4. Disable Back-facing Camera At Maximum Speed
16 RADIO 1. Select lock/unlock alarm sound in "iDrive"
2. Browse navigation menu and watch DVD while driving 3. Disable Daytime Running Lamps 4. Increase The FM band
17 RSE 1.  Add Select Sound Effects Of Lock/Unlock In I-drive
2. Operate Navigation Menu And Watch DVD During Driving 3. Enable Efficient Dynamics Sport CID (Added Sport Displays The Vehicle Info Screen (Power & Torque Meters)). 4. Disable iDrive Legal Disclaimer During iDrive Startup 5. Select Sports Mode In I-drive 6. Turn On Gasoline Station Alert In Navigator 7. Allow PDC(Park Distance Control) To Indicate Park Distance 8. Disable Daytime Running Lamps 9. Convert kilometers To Miles 10. Increase The FM band 11. Disable Handbrake To Play Videos
18 ULF 1. Voice Recognition 2
2. Selecte Bluetooth Phone Ringtone

EASYCODING software:




EASYCODING Scanner package list:



Autel - MD802 (video)

video:https://vimeo.com/49170369


Original Autel MaxiDiag Elite MD802 All System+DS Model MD802 Engine Transmission ABS and Airbag Code Scan Tool


More Autel MD802:

http://www.eobdtool.co.uk/search/?q=md802&DirID=


Turn Luck Turntable to Get Free MPPS V16 & AdblueOBD2 DAF & Opcom 2010V FW V1.59

Hello Friend

Obdtool.co.uk (renew) September Promotion Start!!!

Turn Luck Turntable to Get Free Gifts (Valid Sept 2nd-15th)
LevelItem NumberItem NameQuantity
NO.1SE106 MPPS V16.1.02 OBD2 ECU Porgrammer1
NO.2SS136Vediamo V05.00.05 Software for MB SD C42
NO.3SH40-CAdblueOBD2 Emulator DAF5
NO.4SP105Opcom 2010V Firmware V1.59 with PIC18F458 Chip10
NO.5SS77-BECM TITANIUM V1.61 Software15
NO.6SE119NitroOBD2 Performance Chip Tuning Box for Benzine Cars20

Q: How can enjoy this activity?
A: Once you complete the payment for your order. The Luck Turntable will come out automatically like this

You just need to click it. Then it will prompt whether you get free gift and which free gift you get.

Q: How many times I can enjoy?
A: One customer one chance

Q: How do you send the free gift to me?
A: We will send the free gift with your paid order together

Q: Do I need pay shipping cost for the free gift
A: No, we will send the free gift with your paid order together for free, no shipping cost need

Q: Which shipping method you use?
A: That's depends on the product you buy. If the product you buy is free shipping via standard post, we will send the free gift with your order together via standard post, if the product you buy shipping via express shipping service, we will ship the free gift with your order together via express shipping service

Any problem, please feel free to contact us

Best and regards

OBDTOOL.CO.UK Team

2015-08-26

DIY BMW Bicycle diagnosis with BMW INPA K+DCAN cable

The webpage states BMW INPA K+DCAN cable can only work on 1998 to 2008 BMW cars, but I found some tutorial on a forum to hook it up to diagnose BMW bikes.

Disclaimer:
You are on your risk. I am not reasonable for the damage.

Equipment:
BMW INPA K+CAN cable (INPA or EDIABAS compatible), cheap $20 or so
BMW 10 pin plug is the Ignition cable from an E36 or E39 6 cylinder car.
A laptop/computer running Windows XP home

Diagnostic Instructions:
1) Dependant on the software, model & adaptor cable used it may be necessary to invert RI # and DSR signals to for detection of battery and ignition as per the VAG KKL cable.
2) This cable & access through the diagnostics port is yet to be tested

Software Install:
Step 1: Connect the cable with laptop/computer running Windows XP mode operating system
Step 2: Insert the CD driver on laptop/computer. If the cable does not include driver, you can download it from http://www.ftdichip.com/.
Step 3: Set the USB serial port parameters: My Computer>>Properties>>Device Manager>>Ports (Com& LPT>>Serial USB>>Advanced)
Step 4: Set the Latency timer from default 16 msec. to 1 msec
Step 5: Check USB Port Number matches Port Number set in INPA/EDIABAS (OBD2.ini)
Step 6: Install Mprog & modify the programming of the EEPROM FT232RL
Step 7: We need to invert RI # and DSR # signals to fool the detection of battery and ignition.
After programming check your I/O Control settings list below:
#C0 = RXLED
#C1 = TXLED
#C2 = POWERON
#C3 = PWRON
#C4 = SLEEP
Invert RI ticked
Invert DSR ticked

Save settings

Here is a video for the software installation.

Connection:

Where the connection to the bike is to be via the BMW 10 pin diagnostics socket an OBDII female to BMW 10 pin plug adaptor cable is needed to connect to the OBDII to USB cable.

BMW 10 pin plug is the Ignition cable from an E36 or E39 6 cylinder car.

We need Pin 1,2,4,6,7,9,10 (Pin 7& 9 are K1600 CAN Bus)


Plug with Bike socket


For use with VAG KKL 409 USB cable


For use with K+CAN USB Interface cable

NOTE:
1) Some models (e.g F/G650) have K-Line 1& 2 connected in the wire harness
2) Some models (e.g F/G650) are 3 wires only to the diagnostic socket while no ignition detection
3) G450X needs a loop between pin6 &10 of the BMW 10 pin plug to stop ignition time out
4) The adapter cable has been tested with INPA/EDIABAS for F/G series
5) The adapter cable has been tested with BMW ICOM-A &ISTA-D for F/G series


2015-08-25

How to install Xhorse VVDI Prog V2.1.0 software

Xhorse VVDI Prog ECU programmer 2.1.0 is developed to program multi vehicle EEPROM, MCU and ECUs. VVDI-Prog adds  pin code calculation functions for multi-brand vehicle models as well. Here is the instruction on installing V2.1.0 VVDIPROG software step-by-step. 

Free download VVDIProg 2.1.0 software driver

Software version: V2.1.0 
Language: English/Chinese
Operating system: Windows XP


How to install VVDIProg 2.1.0 software?
1) Install VVDIPROG software driver 
2) Run VVDI Prog software and start programming


1) Install VVDIProg 2.1.0 driver

Insert DVD to computer
Open My Computer
Open VVDIProg2.1 (E:) DVD
Copy and paste VVDIProg folder to desktop
Connect the VVDI prog programmer with computer via USB port
Wait the system to found hardware wizard
Select “Install from a list of specific location (Advanced)”, click “Next

Include this location in the search C:/Documents and
Settings/Adminnistrator/Desktop/VVDIProg/driver/ft232, click “OK” and “Next

Click “Finish
Install driver follow the previous instructions again
Select “Install from a list of specific location (Advanced)”, click “Next
Click “Next
Click “Finish”


Open My Computer>>Manager>>Device Manager>>Ports>>USB Serial Port (COM4) to check well communication is built 


2) Run VVDIPROG V2.1.0 software

Open VVDIProg folder on desktop

Click “Language” tab to exchange language between English and Chinese 

Select ECU type and chip type from the list
The VVDIProg software will prompt which cable/connector is going to be used 

Click “Connection diagram” button
Click “New” tab
Click “Read
The software will display EEPROM data 

Click “Save”, save the bin file to desktop and name it 93c66, click Save 

Create a new window
Select other ECU type and chip type
The system will also prompt which cable is about to use and the detail diagram 

Select other functions and follow the system prompts. 


2015 Original Xhorse VVDI Prog V2.1.0 verified working

VVDI Prog 2.1.0 programmer is verified working. Original VVDI-Prog is the new powerful programmer developed by X-horse Tech. 


What’s VVDI Prog programmer?

VVDI PROG=BMW ISN READ+EERPOM read)+(mcu read MOTO 9S12,5M48,,,,)+PIN CODER Calculation(more pin coder Algorithm ,than 40 type)

Software Version: V2.1.0
Language: English/Chinese
Update: online


 
Hardware:




VVDI Prog super programmer advantages:

1. Original Xhorse product, hardware is well built. It has STarm and LPT port used for ICP, not for linking with pc.
2. 35080, 080D0, 160D0, erase quickly,erase Can be done in 10 s.
3. While reading MC9S12 series Chips, VVDIProg is more stable than Xprog-M ECU box.
4. While attacking MC9S12 series Chips, VVDIProg is faster.
5. While reading some EEPROM Chips, Orange are not able to recognize Chips.
6. Spared voltage attack function can be used when needed.
7. Spared CAN Cable, K-Line Cables can be used when needed.
8. Read CAS4 (5m48) will be more stable than XProg, faster and faster.


VVDI Prog Function List:

VVDI Prog vs. Xprog M (XP Prog) vs. R250 vs. R270 vs. Orange
 

VVDI Prog Package:
1pc x VVDI Prog Programmer multiplexer    
1pc x Square USB cable   
1pc x SOP16 test socket      
1pc x 16pin converter(Support SOP/SOT/SSOP)
1pc x MCU reflash cable               
1pc x ECU reflash cable 
1pc x MC9S12 reflash cable(Used to program MC9S12 series chip)
1pc x 12V3A power adapter(High quality power supply)


VVDI-Prog Adapters/Connectors:

16-pin locking socket 

 MCU Reflash cable
Used to program MCU on board

ECU Reflash cable
Used to program ECU
MC9S12 Reflash cable 
Used to program MC9S12 series chip
For detail EEPROM, ECU, MCU list, please check obdtool.co.uk webpage. The VVDI Programmer is now available in our shop at the price of €385.00

How to use VVDI Prog pin code calculation function?

VVDI PROG Programmer is a comprehensive VAG diagnostic & programming OBD tool, but it keeps updating other vehicle models and features, like calculate pin code/immo code for multi vehicle models, such as Ford, Mazda, Nissan, Saab etc. Here are some pin code calculation & method example provided.

How to use VVDI Prog pin code calculation function?

1)      VVDI PROG Ford Outcode/Incode calculation

Open VVDI Prog software
Select pin code calculation tab
Select vehicle model: Ford->> Outcode->Incode

Press enter the outcode, click “Calculate” button, the VVDI Prog will read Ford incode from vehicle’s immobilize


The vehicle information will display on the button of the screen. Wait the initialization completed. Then click “Calculate” button again, the system will display Ford incode



2)      Nissan 20-digit PIN code calculation by BCM code

Select vehicle model:  Nissan -> PIN 2013-


Manually enter BCM number (BCM code)

Click “Calculate” button
Again the system will display initialization and calculation complete information on the button.
The VVDI Prog device main unit yellow indicator will flash at the same time.
The Nissan 20-digit pin code is calculated.


3) Hyundai PIN Code calculation via VIN

Some vehicle model pin code can be obtained by simply enter the VIN (Vehicle Identification Number), for example Hyundai pin code

Again select Hyundai and model
Copy or enter the VIN number, press “Calculate” button

Again wait the initialization is done and press “Calculate” button, the PIN Code will be displayed



4) VW Magotan Pin code calculation by load dump file

Some vehicle pin code can be obtained by load the dump bin file as well, for example VW Magotan

Load the dump file

The PIN code will displayed on both windows and on the button of the program

Apart from pin code calculation, the VVDI Prog also supports data comparison.

Load dump data file you want and then enlarge the file to make a comparison, displayed pictures below:






Digimaster 3 White/Black Screen of Death (solved)

Some forum bros talked about their death screen (white or black screen of death) of their Digimaster iii. And now, we technicians offers some solutions.



First, please try to update your kernel, according to the following instruction:
Digimaster 3 update EBOOT and kernel

Then, try the following solution if white or black screen of death still appears on your Digimaster 3 after you have updated the kernel.
1. Remove SD card from D3 to cardreader,and connect to PC. After successful connection, click "Removable Disk(E:)" as showed in the picture.


2. Delete the old file "YHTech" which is in the SD card.
3. Copy the "YHTech" files from CD, and save it in SD card.
4. Please insert SD card into Digimater3 after successfully copy and paste. Then connect to 
network and turn on Digimaster 3, click "OK" for downloading when appear remark of "Please connectnetwork download hypervisors!" in the interface.It can be functioned aftersuccessful download.



2015-08-24

MPPS V16 download software, vehicle list, video

MPPS V16 is cheap and high efficiency ECU Chip Tuning cable to read and write ECU via OBD2 port directly. Following are the mpps software, vehicle list, video, user feedback and FAQ provided.

Software version: V16 or V16.1.02








Operating system:
Better to be Win XP SP2 / SP3 (Other systems allowed if it works, Save purpose must be set to American English)

2015 MPPS V16.1.02 Installation Video

 Multi-Language: 
English, German, Spanish, German, Afrikaans, Albanees, Bahasa Melayu, Cech, Cymraeg, Esti, Filipino, Finnish, French, Galician, Hrvatski, Indonesia, Italian, Kiswahili, Latviesu, Lietuviskai Magyar Malti Nederlands, Norsk Polska , Portuguese, Romanian, Slovencina, Slovenski, Srpski, Suomea, Svensk, Turkish

Support ECU types:
EDC16, EDC17, MED9.x, Siemens PPD1 / x, EDC15, ME7.xi much more .

MPPS V16.1.02 added features:
1) EDC15 improvements
2) DDE4 improvements
3) VAG EDC17 CHECKSUM !!!
4) Improvement of many protocols (many bugs have been removed)
5) New cars have been added

Function of ECU flasher MPPS V16:
1.Read and write flash
2.EDC15 EDC16 
3.EDC17 incl CHECKSUM

MPPS V16 firmware PCB board


Customer review:

1) Successfully reading Bosch edc17 cp14 passat tdi cr dpf 140hp 2009.5 model year, picture is taken below:

2) MPPS is a low cost tool and Kess V2 is an expensive high end tool. Today I get form my seller version 16.0.1.2 without loader. Works flawlessly.


FAQ MPPS V16:

Q: How to gain power for the MPPS V16 when using it in the car?
A: You can connect with the car and start the car.

Q: Does it support checksum function?
  A: MPPS V16.1.02 ha
s checksum function

Q: Can i change ecu from euro2 to euro4?
A: This one is used to read and write ECU. Cannot change ECU.

Q: Does the mpps v16 can read and write EDC17 via obd directly?
A: The mpps v16 can read and write EDC17 ECU via OBD

Q: Need I activate the MPPS software?

A: No ,you do not need to activate the software, just install and run it.