Lonsdor K518ISE

Lonsdor K518ISE
Lonsdor K518ISE


How to install Xhorse VVDI Prog V2.1.0 software

Xhorse VVDI Prog ECU programmer 2.1.0 is developed to program multi vehicle EEPROM, MCU and ECUs. VVDI-Prog adds  pin code calculation functions for multi-brand vehicle models as well. Here is the instruction on installing V2.1.0 VVDIPROG software step-by-step. 

Free download VVDIProg 2.1.0 software driver

Software version: V2.1.0 
Language: English/Chinese
Operating system: Windows XP

How to install VVDIProg 2.1.0 software?
1) Install VVDIPROG software driver 
2) Run VVDI Prog software and start programming

1) Install VVDIProg 2.1.0 driver

Insert DVD to computer
Open My Computer
Open VVDIProg2.1 (E:) DVD
Copy and paste VVDIProg folder to desktop
Connect the VVDI prog programmer with computer via USB port
Wait the system to found hardware wizard
Select “Install from a list of specific location (Advanced)”, click “Next

Include this location in the search C:/Documents and
Settings/Adminnistrator/Desktop/VVDIProg/driver/ft232, click “OK” and “Next

Click “Finish
Install driver follow the previous instructions again
Select “Install from a list of specific location (Advanced)”, click “Next
Click “Next
Click “Finish”

Open My Computer>>Manager>>Device Manager>>Ports>>USB Serial Port (COM4) to check well communication is built 

2) Run VVDIPROG V2.1.0 software

Open VVDIProg folder on desktop

Click “Language” tab to exchange language between English and Chinese 

Select ECU type and chip type from the list
The VVDIProg software will prompt which cable/connector is going to be used 

Click “Connection diagram” button
Click “New” tab
Click “Read
The software will display EEPROM data 

Click “Save”, save the bin file to desktop and name it 93c66, click Save 

Create a new window
Select other ECU type and chip type
The system will also prompt which cable is about to use and the detail diagram 

Select other functions and follow the system prompts.