Lonsdor K518ISE

Lonsdor K518ISE
Lonsdor K518ISE

2015-10-25

Top 2 important tips for updating 2015 FVDI ABRITES Commander to V6.3

Some user reported that they come across update issue when updating 2015 FVDI to V6.3. obdtool.co.uk engineer has successfully helped our FVDI users to solve the problem online. OBDTool engineer here provided two important prompts when update your FVDI 2015 with software USB dongle.
ⅠMeet the computer configuration demand:
Make sure your computer/laptop meets ALL following requirements:
  1. Dell laptop is the best choice
  2. RAM: 2GB at least
  3. Driver version: 2.8.14 version ONLY
  4. Windows XP operating system (very important)
NOTE: Do not install or update FVDI 2015 diagnostic tool on Windows 7 or Windows 8 O/S, otherwise will cause problems.
Correctly connect FVDI 2015 Commander
Follow the connect way to when update firmware and open authorization
  1. Connect FVDI 2015
Connect the software USB dongle to FVDI. Do not connect the USB dongle to computer.  Connect FVDI commander and computer via USB cable. Do not connect the FVDI to vehicle during the procedure. FVDI’s green indicator light flashes. The software dongle red light illuminates but the green light of the software dongle is off.
FVDI-2015-2
  1. Open authorization
Step 1: Connect the software USB dongle to FVDI (Note: do not connect USB dongle to the computer).
Step 2: Use USB cable to connect FVDI and the computer. Wait until FVDI green light illuminate and USB dongle red light on. Then connect USB dongle USB cable to the computer. During the procedure, the USB dongle red light keeps on (Note: do not connect FVDI to the car)
Step 3: If the above 2 steps works well, connect FVDI to the car.
FVDI-2015-3
FVDI ABRITES Commander: