Lonsdor K518ISE

Lonsdor K518ISE
Lonsdor K518ISE

2016-03-16

How to reset Service Interval for LANDROVER with VXDIAG interface

This post is on how to reset Service Interval for LANDROVER with VXDIAG interface. Hope it will help.
Tool to use:
VXDIAG interface running Landrover software
Recommend you use this one price at €239 + shipping cost, details at:
This one can run original software.
allscanner vxdiag
Next step: install driver
Installation Note:
  1. During installation, disconnect USB cable to the PC
  2. Setup complete. The shortcut will create on the desktop.index08
Connection device and run VX Manager, The information of device will be displayed in "Device Manager".
Procedure: reset Service Interval for LANDROVER with VXDIAG interface
1.Run JLR SDD
Run JLR SDD
2.Click SDD
Click SDD
3.Click[Auto VIN Read]
Click[Auto VIN Read]
Reading VIN...
Reading VIN
4.Click [Diagnosis]
Click [Diagnosis]
5.Symptom Selection and click [Continue]
Symptom Selection and click [Continue]
6.Click [Recommendations]
Click [Recommendations]
7.Click [Run]
Special applications: Service interval reset
Special applications: Service interval reset
8.Click [Agree]
reset-service-interval-for-landrover-09
9.Set the ignition switch to on. Press tick to continue
Set the ignition switch to on waiting for system to stabillse
10.Press tick to continue
Ensure an approved battery charger is connected.
Ensure an approved battery charger is connected
11.Set the ignition switch to off. Press tick to continue
Set the ignition switch to off.
Processing car configuration file data is completed.
Processing car configuration file data is completed
12.Make sure the ignition is switched on. Press tick to continue
Make sure the ignition is switched on
Service interval:Read the vehicles time and distance related is completed
Read the vehicles time and distance related is completed
Global real time:Read the vehicles time and distance related is completed
Read the vehicles time and distance related is completed
13.Set the ignition switch to off. Press tick to continue
Set the ignition switch to off. Press tick to continue
14.Make sure the ignition is switched on. Press tick to continue
Make sure the ignition is switched on
Resetting the service interval is completed
Resetting the service interval is completed
15.Set the ignition to off. Press tick to continue
Set the ignition to off
16.Set the ignition to on. Press tick to continue
Set the ignition to on
17.Clear the fault codes? Press tick to continue
Clear the fault codes?
Clearing the fault codes.
Clearing the fault codes
18.Clear the fault codes is completed. Press tick to continue
Clear the fault codes is completed
19.Set the ignition switch to off. Press tick to continue
Set the ignition switch to off
20.initialising... Press tick to continue
initialising...
21.Set the ignition switch to on. Press tick to continue
Set the ignition switch to on
22.Control module procedure completed successfully. Press tick to continue
Control module procedure completed successfully
23.Set the ignition switch to off. Press tick to complete
Set the ignition switch to off reset-service-interval-for-landrover-success