Lonsdor K518ISE

Lonsdor K518ISE
Lonsdor K518ISE


Toyota G and Remote Function Dongle €30.99 Feedba

Breaking News! Toyota G and Remote Function Dongle price cut down to €30.99 + free shipping worldwide. Details at:
The package only contains one dongle.

I suppose you want to overview users’ feedback before place order, read following Toyota G and Remote Function Dongle feedback:
It works perfectly fine. I had not used it until now to do immo but remote programming works as advertised. Very simple. Tested on Toyota Highlander and Toyota Rav4 until now.Separate key and remote on these cars that I tested.
Remote section works perfect no problem tested on a 2009, 11, 15 Camry , RAV4 , Prius C
Following are supplier’s description, some function I haven’t tested, I attach here aim to give you a reference.
Toyota G and Remote Function Dongle Description:
Apply to 4D67,68,72(G), support both G and H chip, test on 2015 Camry
Toyota add remote control:
Get in the car and close the door, insert the key and turn the key on, insert the device into OBD. After the sound(Dee-), it will start to add the remote control.
After the sound ( Dee- Dee-),open the door, when hear the sound blaring. Press ‘ lock & unlock’ key at the same time. And press the’ lock’ key. If the blaring end, It’s OK.
Note:  Switch is on the right.(add remote control)
Toyota add transponder:
Get in the car and close the door, insert the main key into the lock and turn the key on,and then insert the device into the OBD. If it will sound twice, it will start to add transponder.
After the sound (Dee-Dee-), 2-3 minutes later, anti-theft light is on. And then remove the key( anti-theft light will flash), insert the new key and doesn’t need turn the key,
anti-theft light will be off later.
Note: switch is on the left.( add transponder)