Lonsdor K518ISE

Lonsdor K518ISE
Lonsdor K518ISE


Which battery tester better Launch BST460, Launch BST760, Foxwell BT705 and Foxwell BT100?   

These car battery system testers including Launch BST460, Launch BST760, Foxwell BT705 and Foxwell BT100 are all best received in www. obdtool.co.uk, what their similarities and differences? After reading following comparison table, you will get the answer.
Tool NameLaunch BST460Launch BST760Foxwell BT705Foxwell BT100
Main unit
Item No.AD55-BAD56-CAD86AD93
Price€ 90.99€ 345€ 109€40.99 and free shipping
LanguageEnglish/ Russian/
Japanese/ Chinese
English, Spanish, German, French and ItalianEnglish, French,
Spanish, Dutch,
German, Italian,
Russian, Polish,
Simple Chinese,
Traditional Chinese
English, French, Dutch, German, Spanish, Russian and Chinese
FunctionDirectly test the
battery of the loss of
electricity, bad cell battery
Directly test the battery of the loss of electricity , bad cell batteryCheck battery health
and detect faults of
starting and charging system.
check battery health and faults
Auxiliary functionNoView / Print
Ammeter Function
QC mode
License plate number input function
Time and time format Adjustment
User information input
Display backlight brightness adjustment function
Print sharpness adjustment
Standby power function
Vehicle applicationsUniversal car till 2014passenger cars
and duty trucks
passenger cars and light duty trucks
Scopesuitable for 6V & 12V battery system and 12V & 24V starting and charging system detects6V & 12V battery system and 12V & 24V starting and charging system detects.Apply to the European and American countriesTests 12&24
volt charging system
Voltage measuring: 6V to 18V
Battery typesA variety of models, all kinds of batteries , and a variety of system modeRegular flooded,
AGM flat plate ,
AGM spiral and GEL
Flooded, AGM, GEL
Battery ratingCCA 100-2000
BCI 100-2000
CA 100-2000
MCA 100-2000
JIS 26A17 - 245H52
Standard DIN 100-1400
The IEC 100-1400
EN 100-2000
SAE 100-2000
GB 100-1400
100 - 2000CCA100 - 800CCA
Standard supportCCA,BCI,CA,MCA,
Built-in printerNoBuilt-in thermal printer , the test results can be printed out at any time.Built in Bluetooth PrinterNo

Autel DS708 and MS906 Update Service

Autel DS708 Update Service - MS906 Update Service:
Now we provide update for Autel DS708, if your DS708 is over warrantry for free update, you can buy this service to get update online.
Original Autel MaxiDAS DS708 and MS906 Update Service
1. Available for All the DS708 and MS906 which over 1 year online update.
2. Fees: 500USD
3. After you buy this service on our website, please tell us the Serial Number of your Maxidas DS708/MS906, we will open the authourization for you, then you can log in autel ds708 website to update your DS708/MS906.
4. No shipping, only online service.
We will send you DS708/MS906 Update card, there is user account and activation code on this card
You can login autel official website. click "Redeem" to choose product serial number and activation code on that update card to update your device

How to do BMW Digital Speedometer Coding with E-sys

Here’s the instruction on how to install E-Sys and psdzdata to do BMW F10 coding with BMW ENET Cable.
* model
* device
  1. A laptop PC with Windows OS
  2. ENET Coding Cable

The BMW coding cable is basically a cable which has an Ethernet port at one end (for plugging into the laptop lan port) and a OBD port at the other (for connecting to the OBD port of the car). All F series cars need the same type of cable.
* software
to code BMW F10, you need E-Sys and psdzdata
E-Sys 3.26.1 installation procedure
  1. Extract Esys
After you downloaded the esys archive, extract it using Winrar. Right click and click “extract here”

This will create a folder called E-Sys 3.26.1 containing all the files needed for the installation.
How to install Esys
Click on E-Sys_Setup_3_26_1_b42487.exe in order to begin the installation process.
Select English or whichever language you need, click next
click “I accept the agreement”, click next
Select E-sys installation location, the default location is C:\EC-Apps\ESG\E-Sys and that`s good you can leave it like that.

set the data path for Esys, the default is C:\Data which is fine also.

Click next until the installation begins
click Finishafter the installation process finished .
(This ends the basic installation procedure for E-sys)
Note: Learn the tricky part of making it work.
see two folders, one is a Patch and one is a software that generates a Token needed for Esys

The patch folder contains 2 files

You must place the svc0x80.jar file in the lib directory (C:/EC-Apps/ESG/E-Sys/lib). Right click on it, Copy and then go to the destination folder, right click and Paste it.
Place the E-Sys.bat (batch file) in the same directory as the .exe file. Replace the .bat file in that directory (C:/EC-Apps/ESG/E-Sys)

Use the Token Software – enter a username (an be anything), same for the password, just make sure to set something simple you can remember. This will save the Token file in My Documents folder. Leave it there, Esys will look for it in that location.
* How to install psdzdata
This is an important and final step of the installation process. The esys installation doesn`t contain any data so you must copy the data into the right folder.
I recommend using the “lite” version of the Psdzdata because it has all the Firmware data removed so it saves a lot of space (376mb instead of 20GB so there`s a BIG difference). The guy from the Fiverr gig above offers Full data and also the Lite version so you can use whichever you want.
To extract the psdzdata archive you need WinRAR or Winzip installed on your laptop.
Right click on the archive -> Extract here

When the extraction process is finished you will have a new folder called “psdzdata”. After that go to C:\Data and erase the existing “psdzdata” folder and copy the extracted one in the same location. By doing this you are basicly replacind the empty psdzdata folder with the one that contains the data files needed to code you BMW F10.
E-SYS Installation complete!
* How to use E-sys
Open Esys on desktop
click on Options -> Settings, after Esys has loaded

Go to the EST interface and set the EST Token location

click Ok to close the “Settings” window.
Esys setup compete!
* How to code BMW F10
Now we are ready to code BMW F10 with mod “Activate digital speedometer”.
First plug the ENET cable to F10 OBD port and to the laptop’s USB port
push the “Start” button of your car without pushing the brake
click the connect icon in Esys
E-Sys-psdzdata-code-bmw-f10 (12)
choose your chassis
Choose F010 as a target as pictured below, never use F010_DIRECT
E-Sys-psdzdata-code-bmw-f10 (13)
click “Connect
NOTE: If the Esys target window is empty and there are no possible selections, it means you didn`t copy the “psdzdata” folder to C:\Data correctly.
In case you have other F series BMWs you want to code I will show you what targets you must choose in Esys for each model:
F001 psdzdata covers the F01/F02/F03/F04/F07 (5-Series GT is an F07 NOT an F10)
F010 psdzdata covers the F06/F10/F11/F12/F13/F18
F020 psdzdata covers the F20/F21/F22/F23/F30/F31/F32/F33/F34/F35/F36/F45/F80/F82/F83
F025 psdzdata covers the F15/F16/F25/F26/F48/F85/F86
F056 psdzdata covers the F64/F55 F56 (Mini Coopers)
I001 psdzdata covers the i3/i8

click “Read” Vehicle Order TO load the FA, which contains all the information about the modules and options installed on your BMW.

click on “Read SVT”. This will list all the modules installed on the car and show them as a list on the left side of the screen. We will be using this list to do the actual coding. You can always click on the images on this page to zoom in. If you`re on mobile, for larger pictures you can switch to landscape mode to see the pictures better

Right click on any module you wish to modify
click “Read Coding Data”.
In this example, we will be coding the Digital Speedometer on the dashboard, so we are reading the KOMBI module.

After Reading the coding data, you must get a confirmation window like this.

Click on the new CAFD folder in order to expand it
then right click like in the example above and “Edit FDL”. You will be asked for the Token PIN so make sure you remember it, so set something easy when generating the token. I always set it to 12345678 so it`s easy to remember.

Search for the value to change
Recommend the “Software” section in the ENET package to get the securest Cheat Sheet for BMW F10.
all you need to do is to expand the “Ausgelesen” branch
right click on the value and edit it to make it “Aktiv” (enable) or “Nicht Aktiv” (disable) a feature.
Click on the Blue Disk Icon (top left) to save the changes click on the “Green arrow” to  back to the SVT List Screen

Activate the FA first before doing the actual FDL coding

click now on “Code FDL”
your cluster maybe restarts, this is normal when the coding procedure is completed. You will also have to set the time and date again.
You`ve just completed your first MOD! Now you`ll have a Digital Speedometer in the cluster, just browse the menus with the BC key and you will see it, it`s the last menu iten.
Most people will buy:
ICOM A2+B+C Wireless Diagnostic Programming Tool for BMW with V2015.10 BMW Rheingold Software:

How to use TACHO PRO U2008

How to use TACHO PRO 2008 ?
The tacho pro U2008 dash programming is newest version 07/2008, which Fully support European, American and Asian vehicle types, most of which can be adjusted via OBD-II diagnostic plug. obdtool's tacho pro 2008 with high quality and 1 year warranty
But how to use it,which seems like a not simple work,now we would like to share the method step by step.
Free Download:
1.Tacho pro u2008 support car list
2.Tacho pro 2008 user manual
Step 1:Power supply
The Universal Dash Programmer handheld is powerded with 12 V by a 3,5 mm
miniplug (port 1). Please use an AC adapter with at least 500 mA, better 1 A.
External power supply is necessary when programming a detached odometer.
When programming through the diagnostic port, the handdeld is powered by the
car through the port. The diagnostic plug is positioned in port 3.
When programming through the diagnostic port, do not supply the
handheld with power through port 1!

Tacho Pro 2008 Unlock Tacho Pro 2008 OBD2 mileage correction
Step 2.Start menu:
When supplying the handheld with power, you can see the start menu in the
display. It offers the possibility, to change the backlight by pressing the STOP
button. With button 0 you can make an update( software updates). Press OK to
Now the handheld is asking for a password. This function is always activated
when you get a Universal Dash Programmer, but you can switch it off ( options).
Step 3.:Software Updates
Tacho v 2008 Software updates can be installed by yourself to the handheld. You only need a
DOS or Windows computer with a serial port and a 0-modem cable:
PLEASE ERASE all eep’s before updating you Universal Dash Programmer!!!!
1. Connect the cable to your computer(com 1 or com 2) and port 2 on the
2. When starting the handheld, choose SYNC for update.
3. Start the update program that you have received from us and make sure that
you have a working internet connection.
4. wait until you see “RESET” on the display.
5. For new types please contact us to get the code you have to type in under
update special.
After the start menu, you see the main menu with the different manufacturers and
the menu OPTIONS, UPDATE and SYNC.
With button 8 you can move up, with button 2 down. Then the bar is on the desired
menu, press OK. If you have chosen a wrong menu, you can quit by pressing
Step 4:Menu Options
■ Choose language
Here you can choose a different language for the .
■ New PIN
First you have to enter the old PIN. Then the handdeld asks you for the new
PIN that you have to repeat again. The password consists of a combination of Tacho Pro 2008 Unlock Tacho Pro 2008 OBD2 mileage correction
pressing 6 button of your choice.
■ Erase all eeps
With this menu you erase all data that you have saved before. First you have
to press E to verify, then you have to enter your PIN.
■ Clear 1 EEP
Here you can erase the last data you have saved.
■ Verify PIN
With this menu you can switch on or off the password function when starting
the handheld. With the button STOP you can switch it off. To switch it off you
have to verify it with the password.
Menu updater
This is for new software, for example new manufacturers or models can be
unlocked with this function. Therefore contact us.
Generally software improvements are installed by the start menu (0 for
update).in the main menu updater is only used to unlock new programs.
Used for saving data from your handheld to your computer. This is done with the Tacho Pro U2008 program Universal Dash and a 0-modem-cable. Choose SYNC when the program asks for it.
Tacho Pro Plus V2008 Main Unit Only fit with JULY version:
Tacho Pro Plus V2008 July Version Main Unit on Sale.This is the main unit of tacho pro u2008 dashboard programming tool July version.Used for those customer whose main unit has been damaged or lost.


Foxwell BT100 for Flooded AGM GEL_Manual_Reviews

Foxwell BT100 12V Car Battery Tester for Flooded AGM GEL:
Foxwell BT100 provides a quick, easy and affordable solution for technicians to check battery health and faults.

Top 11 Reasons to get Foxwell BT100 12V Car Battery Tester:
Multilingual menu and test results – English, French, Dutch, German, Spanish,Russian,Chinese
Multiple vehicle applications – passenger cars and light duty trucks
Tests batteries rated from 100 to 800CCA
Tests multiple battery types - regular flooded, AGM flat plate, AGM spiral and gel
Tests multiple rating systems - CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE
Tests the batteries on the car directly - no need to remove the battery
Detects bad cells
Quick and accurate test result display in just 3 seconds
Does not emit light, heat or spark, or discharge battery - keeps operation safe for all levels of users
Automatic temperature compensation
Extremely easy to use with large backlight LCD display and menu-driven operation
How to Set Foxwell BT100 Language:
After the BT100 machine start up--foxwell logo come out--press the key enter into lanauge menu--choose the language you need
Foxwell BT100 12V Car Battery Tester Specification:
Voltage measuring6V to 18V0.5%
Battery typeFlooded, AGM, GELN/A
Battery rating100 - 800CCA±(3%+10)CCA
Standard supportCCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SEAN/A
Operation Temperature-20 to 60°C (-4 to 140°F)N/A
Storage Temperature-20 to 70°C (-4 to 158°F)N/A

How to build ENET cable for F series coding

There are basically two ways to get the BMW ENET cable, to buy a complete one or simply build one by yourself. Read the following to get it.
One way is to build a cable yourself. Cost for this would probably range anywhere between 10 to 20 bucks. You will need to solder a bit but it's nothing too serious if you follow the instructions to the letter.
To build your own cable, you will need the following:
- OBD2 connector
- RJ-45 cable and connector
- 510 ohm .25 watt resistor
The schematics of the official BMW cable can be found below in the attachments and how to solder your cable can be seen in the photos directly below (thanks to Sean [ImSW1]).
Cable soldering diagram:
The cable is CAT 6
PIN 3 - light blue (CAT 6) would be Green Stripe (CAT 5e)
PIN 4 & 5 (bridged) - Brown (0CAT 6) would be Brown (CAT 5e) - this is what is grounded to the RJ-45
PIN 11 - Green (CAT 6) would be Solid Green (CAT 5e)
PIN 12 - White (CAT 6) would be Orange Stripe (CAT 5e)
PIN 13 - Orange (CAT 6) would be Solid Orange (CAT 5e)
PIN 8 & 16 (bridged) with a 510ohm, 1/4 watt resistor

Free download “Step-by-step ENET diy manual” - 100% understandable
(NOTE: this diy guide is from utenigma and svache at f30.bimmerpost.com, i have not tried, put it here)
But if you are not interested in building one and want to spend a little bit more money to get a working cable, then this is a site that has been confirmed working by some of our F10 friends: http://www.eobdtool.co.uk/wholesale/bmw-enet-ethernet-to-obd-interface-cable-e-sys-icom-coding-f-series.html.. I wouldn't recommend other sites, although they may work, problem is that they have not been confirmed working yet. Functions of enet cable at obdtool has been tested for years (many discussion in forums).
I have used my own cable there for half a year. His cables are great. He builds and ships them for $12 USD only. Usually, after he receives payment, he can have the cable ship the next day and arrived a week later.
Most people will buy:
ICOM A2+B+C Wireless Diagnostic Programming Tool for BMW with V2015.10 BMW Rheingold Software:


XTOOL EZ400 Multibrand Diagnosis System Wifi Android based English Spanish

Xtool Company newly develop one diagnostic system named EZ400, it is based on Android system which ensure fast boot-up and multitasking, and WIFI connectivity is allowed, it is available with English and Spanish so far.
Full package include main unit and adapters:
The VCI (main unit) is 7 inch multi-touch screen and with stand

XTOOL EZ400 Parameters:
Operating System: Android 4.4.4
Memory: 1GB RAM, 16GB Flash
CPU Quad Core, 1.3 GHz
Display 7 Inch IPS 5-Point Multi-touch Screen with 1024×600P Resolution
Sensors: Gravity Sensor, Light Sensor
Input/Output: Microphone, Dual Speakers, 3.5 mm headset jack, Mini HDMI Port, 2.0USB Port, TF Card Port
Battery:  2400mAh, 3.7V
Power Voltage:  5V
Power Consumption: 8W
Operating Temperature:  -20 to 50℃(-4 to 126℉)
Humidity: <90%
Dimension:  (L*W*H): 208*140*15.5mm
XTOOL EZ400 Multibrand Diagnosis System Details:
Vehicle coverage: EZ400 provides extensive vehicle coverage for most US, Asian and European makes, which makes it the best solution for workshops.
American: GM, Chrysler, Ford, Chevrolet, Hummer, Cadillac, Saturn
Europe: Volvo, Skoda, Land rover, Jaguar, Ford, Sprinter, Seat, Renault, Peugeot, Opel, Vauxhall, Fiat, Citroen, BMW, BENZ, AUDI, VW, Porsche, Lancia, MayBach, Rolls-Royce, Mini, Smart, Transporter, Lamborghini, Gugatti, Abarth, VW_CV
Asia: Acura, Honda, Infiniti, Isuzu, Lexus, Mitsubishi, Nissan, Suzuki, Kia, Toyota, Hyundai, Mazda, Daihatsu, Daewoo, Scion, Holden, AUFord and more…
Chinese Vehicle: Geely, Chery, Greatwall, Jiao, Lifan, BYD, Brilliance and more...
Workable ECUEngine, ABS, Airbag, Transmission, Immobilizer, Body (ECM), Chassis……
Basic function:
read fault codes, clear fault codes, live data, actuation
Accurate live data in both Wave and Dashboard form
Special function (Highlight):
ABS bleeding, service light reset, DPF regeneration, steering angle calibration, battery reset, throttle body adaptation, Service light reset, Throttle Sensor Adjustment…..
Wifi: WIFI connection, user can Easy registration with EZ400 connected to WIFI and One-click software update via WIFI.
Operation system (OS): Andriod System which ensure fast boot-up and multitasking.
Memory: up to 32GB extension SD card
Bluetooth: yes. EZ400 can wireless diagnosis via Bluetooth

XTOOL EZ400 other features that stand out:
Remote access: it is perfect for training, demonstration and even remote diagnosis.
*Diagnosis reports in PDF file: Print out the diagnosis report and show it to car owners when they come and fetch their cars. They will be really happy knowing what kinds of problems have been fixed for their cars.
*Record and playback live data
On-board battery
XTOOL EZ400 registration:
Easy registration with EZ400 connected to WIFI. Don’t bother to use PC for registration.
XTOOL EZ400 update:
One-click update via WIFI

New Xhorse VVDI RKE BOX €22.99 free shipping worldwide

New tool by Xhorse Company!
VVDI RKE BOX by Xhorse Company sales for only €22.99 free shipping worldwide at obdtool.co.uk, details at:
Package as follows.

Xhorse VVDI RKE BOX is applied at the following aspects:
  1. To change the original straight remote control to folding remote
  2. No method or apparatus temporarily to add a new remote control
  3. Temporary replacement because of the original out of stock
  4. Only one remote for the original car (such as the Chinese, Besturn, etc.)
  5. To seek low-cost remote control instead of the expensive original one
Note: at least one original remote control for use of the kit
  1. Wiring method:
Remove the circuit boards in the original remote control, and connect to the main unit as the right picture shows (connect the white wire to buttons, red to the positive, black to the negative)

Note: 3 kinds of remote button: 2-feet, 4-feet and 5 feet buttons
4-feet and 5-feet buttons: no direction distinction, but it must be soldered at the diagonals
2-feet buttons: no direction distinction, and respectively solder the two feet
  1. The optional method to get power:
Via OBD or 12V constant power from the car
  1. Key/ remote matching and clearing
Matching keys procedure:
Step 1: Press SET button on the Host box (in the internal hole at the side of unit), then the buzzer beep twice, to go into the matching state
Step 2: Press any button on the new remote for a while until the buzzer beep continuously. Key matching is completed.
Step 3: Repeat the previous two steps to add another new key.
1): Up to six keys to match for one Host box; the key matching will fail if more
2) In the matching state, the buzzer beeps one time if the key cannot be detected for more than10 seconds, and then automatically exits the matching state to go into the normal working state.
Clearing keys procedure:
Press SET button for a while until the buzzer beep continuously. All the keys matched previously are cleared and return to factory state
If the key is lost or not to use, you can erase all the keys and then re-add all lost keys to ensure safety.
match and erase
  1. To add the key embryo and anti-theft chip to the remote control