Lonsdor K518ISE

Lonsdor K518ISE
Lonsdor K518ISE


How to Diagnose CUMMINS by Xtuner T1 Heavy Duty Scan Tool



Connect XTUNER-T1 with the vehicle. After connection, the power indication light will turn on. Search the WIFI of XTUNER-T1 on the PC or pad, and connect the WIFI point manually. If the WIFI connection successful, the WIFI indication light will turn on.
Run the XTUNER-T1, and start to diagnose.
Choose the vehicle CUMMINS
Select the Engine type and press next page
It is connecting to ECU...
Then it comes to the function menu
Choose Read Fault Codes
Then Xtuner T1 will read out the stored fault codes immediately
Go back to the function menu and choose Erase Fault Codes
Then the trouble codes were erased!
After erasing the fault codes, you should turn off the ignition and wait for 10 sec then turn on ignition again

Go back to the function menu and choose Data List
Select some items of data stream
Select the 1st item, and click the Wave button:
Click the Record button to start data recording, until to click Stop button to stop recording:
Click the Play button,XTUNER T1 scanner will show the recording data list, select one of them and replay the recording data:

Go back to the function menu and choose Maintenance Oil Reset

If you want to store the test result on your PC or PAD or on a paper, you can capture, save and print screenshots anytime and anywhere.
Printsout the recorded data.
Press “OK” to print the test report, as below
More information, Compatible trucks brand: