It’s super easy
even for beginner to successfully program VW Jetta 2011 remote key by XTOOL X100 PAD Tablet Key Programmer! Check below guide step
by step to start!
1.
Connect
XTOOL Bluetooth VCI box with car OBD port to connect XTOOL X100 PAD with car
via Bluetooth.
2.
Go to “Immobilization”
then choose “VW/AUDI/SKODA/SEAT” section and “VW/AUDI/SKODA/SEAT V26.61”
3.
Choose
“Program remote” function and turn on ignition with the new key.
And click “VW” then “09 Central
Control (CANBUS)”
4.
Choose
“Program remote” and follow the tip to press any button of the new remote key.
5.
Program
success, whether to program next one? Click NO to stop key programming.
Now XTOOL X100 PAD program new remote key for VW Jetta 2011
successfully! The new remote control is tested working!
Where to get this
XTOOL X-100 PAD key programmer for only €449?
XTOOL X-100 PAD at eobdtool.co.uk is €449 and with
free shipping!