Lonsdor K518ISE

Lonsdor K518ISE
Lonsdor K518ISE

2017-02-23

(NEW) OBDSTAR X300 DP program Toyota Corolla G chip all key lost

OBDSTAR X300 DP review for sharing: OBDSTAR X300 DP is newly tested OK to reset Toyota G immobilizer and program Toyota Corolla G chip key when all key lost! Check below to know the steps!

Step1.
Connect OBDSTAR X300 DP with Toyota Corolla via diagnostic OBD2 port.
Turn on car ignition, power on X300 DP Pad and click “Diag Program” to start.
Choose “Immobilizer” and find “Toyota”.
Step2.
“Toyota/Scion/Lexus V31.11”, click “OK”.
“Select from vehicle” and Select “Toyota”
Step3.
Choose region “Asia” then car model “Corolla”.
OBDSTAR X300 DP is available for Corolla from 2001 to now. In this case, choose “2010-” option.
Click “Immobilizer” then “OK”.
Step4.
OBDSTAR X300 DP PAD can reset Toyota G chip and H chip.
In this case, choose “Type1 (With G, 72)” then “Reset immobilizer (All key lost)” function.
And follow the tips to repeat this procedure: turn off ignition→ turn on ignition→ turn off ignition and remove the key.
Car security indicator starts to blink.
Step5.
It will show key programming instruction as below. In this case, we are going to program 1 master key.
So insert the key, turn on ignition and wait 5 seconds.
Then turn on ignition quickly for 5 times.
Car security indicator off and key programming complete!
OBDSTAR X300 DP Tablet Key Programmer successfully program Toyota Corolla G chip all key lost!
Two different configurations of your choice:
OBDSTAR X300DP standard set 769 free shipping
Immobilizer+ odometer adjustment+ EEPROM/PIC adapter+ OBDII
OBDSTAR X300DP full set 959 free shipping

Immobilizer+ odometer adjustment+ EEPROM/PIC adapter+ OBDII+ ABS+ TPS+ SRS reset+ TPMS(low tire)reset+ Steering angle reset+ CVT learning/Value reset+ EPB+ Oil/service reset+ Battery matching+ Diagnosis (Japanese and Korean serials).