eobdtool

2017-04-23

OPCOM Firmware 1.70 1.65 Tested: 100% OK with VAUX-COM 2014/2010

Opcom v1.65 & Op-com v1.70 china clone firmware update! And op com china clone software free download, including opcom 2014 and opcom 2010 software vaux-com.

opcom firmware 1.65 download:
will be available soon 
opcom firmware 1.70 download:
will be available soon
opcom firmware 1.59 download:
opcom firmware 1.45 download:

Opcom fw 1.65 vs. Op-com fw 1.70:
Opcom 1.65 vs. Op-com 1.70 only differs from the PCB design;
Share the same features and functions
Optional to work with opcom software vaux-com: ver. 2010, ver. 2014
confirmed to work perfect with opcom 2010 or 2014 software


Opel Opcom basic information:

  1. OPCOM is a special PC-based diagnostic interface especially for OPEL.
  2. Software Version:2010/2014  Firmware Version: 1.65/1.70
  3. DO NOT update opcom online; otherwise, the device would be damaged!

New OPCOM 2010/2014V Software Function:

  1. It covers almost all Opel cars, incl. new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B.
  2. The program allows users to read out and clear fault codes, shows you live data and perform output test.
  3. The program supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module,
    Instrument Cluster, Electronic Climate Control, Body Control Unit, etc.
  4. Since Opel cars adopt many PINs in the OBD connector, the diagnostic interface works as a multiplexer,
    and users need select the appropriate pin for communication. PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)
  5. Fault codes will be shown with all information available:

Full fault code text description:

1) Full status information (Present, Not present, Intermittent)
2) Users can print out, save, or copy the fault codes to any other application.
From the fault codes window, users can go directly to the measuring blocks window.
3) The program shows measuring block information on many control module, users can choose anything from the list on your own.
4) The program is capable of showing 8 measuring block parameter simultaneously.
The sample rate is depends mostly on the communication protocol.
For example, the older system like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow during communication, while the newer Multec or Bosch units are faster (using KWP-2000), and the newest CAN based control units are very fast!

Users can also run output tests on many controllers.

PIN6-PIN14
PIN3-PIN11
PIN1
HSCAN - Dual-wire, High Speed CAN-BUS, 500 kbps
MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps
SWCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps