Lonsdor K518ISE

Lonsdor K518ISE
Lonsdor K518ISE


How use INPA K+DCAN Cable to DIY BMW Folding Mirrors Coding?

Do you know you can use 14.5 BMW INPA K+DCAN Cable and NCX Expert to activate BMW folding mirrors function? Then you can enjoy this cool function to control the mirror fold by your remote key!
BMW Folding Mirrors Coding DIY Tutorial (Set BMW E92 as an example)
Step 1: Plug the BMW K+DCAN USB Interface into car OBD2 port to connect car with BMW NCX Expert software.
Open NCX Expert, click “Profile Load” and choose “Expertmode 2.0”.
Step 2: Click F1 button “ZCS Enter” then F3 button to select the chassis “E89”. (E89=E90, E91, E92, E93)
Then choose “CAS”.
Click F6 button to back.
Click F4 button to select the module “NFRM”.
Step 3: Click F2 to change job and select “CODIERDATEN LESEN” option which means “Read coding data”.
Click F3 button to execute job and wait until you can see “Codierung beendet” which means “Coding ended”.
Step 4: Go to NCSEXPER/WORK folder and open “FSW_PSW.TRC”.
Search “ASP_KOMFORT_EINKLAPP” or “SPIEGEL_ KOMFORT_EINKLAPP” according to your car model and year.
In this case, it’s “ASP_KOMFORT_EINKLAPP”.
Change the value from “nicht_aktiv” to “aktiv” and save the change.
Step 5: Copy “FSW_PSW.TRC” and delete “FSW_PSW.MAN”.
Rename the copy file as “FSW_PSW.MAN” then click “Yes”.
Go back to click “File” and “Profile Editor”.
It will require you to enter password. Enter “repexp”.
Now you can see the editor as below:
Click “FSW/PSW” button and remember to choose the “FSW/PSW Maniplate” option as below.
Wait until you can see “Codierung beendet” that means BMW Folding Mirror Coding finally complete by INPA K+DCAN Cable and NCX Expert!