eobdtool

eobdtool
Welcome to eobdtool

2017-05-07

(Real pictures) Launch M-Diag Lite PCB board vs. Easydiag

I bought Launch M-Diag LitePlus and took it apart to check the PCB board. Compare with Easydiag, mostly same but better contacts used in the diagnostic socket.

Here share with you some Launch M-Diag Lite PCB real pictures:
Inside Launch M-Diag, I found a two-board design, the boards were tightly connected to each other by a pad of twenty jumpers.
One board with a multiplexer and a processor, and the other with a Bluetooth module and power system. And yes, there is a USB connector, just like LAUNCH EasyDiag.
On Launch M-Diag Lite main (processor) board there are the following markings:
LAUNCH 10200716
DBSCAR_MAIN_STM32F207 - name of the board and the processor used
2015.05.29 - production date
V1.00.000 - version of the board
On the "communication" board there are the following markings:
102200685
V1.00.000 - version of the board
2014.11.08 - production date
The main board has:
Processor STM32F207IGH6
Multiplexer JV700
Also on the board contacts are similar to the connection of the service connector.
The communication board uses only two controllers in the Bluetooth module:
Mx29lv800cbx81-70g
Bc417
Here I bought my Launch M-Diag: €66 free shipping and a free software