Lonsdor K518ISE

Lonsdor K518ISE
Lonsdor K518ISE

2017-12-28

New Release OBDSTAR H110 VAG MQB IMMO Cluster tool car list

OBDSTAR H110 VAG MQB IMMO Cluster tool is the first released device in China. It works with NEC+24C64 2014- (incl. old models). The package comes with an RFID Adapter which is a good solution to 4th and 5th generation of VW.
In the below paragraph, I say VAG-I+C instead of VAG MQB IMMO Cluster tool.

OBDSTAR H110 IMMO car list

  • 2 - 3.5 Generation Immo 17 Dashboard
25 Immobiliser

  • 4 Generation Immo

Audi A1:NEC+24C64 2013, 2014.6- Audi A3/TT/R8(CDC+24C32/3217/3297)
Audi A4 RB4 Audi A4 RB8
Audi Q3: NEC+24C64 2013 Models, 2014.06- Audi Q7/A6L(C6): 9S12DT(G)128, 9S12DT256 VW/SKODA/SEAT: CDC+24C32 VW/SKODA/SEAT: NEC+24C32
VW/SKODA/SEAT: 2013 Johnson VW/SKODA/SEAT: Motorola 9S12XHZ512 VW/SKODA/SEAT: NEC+24C64 VW/SKODA/SEAT: NEC+95320 VW/SKODA/SEAT: NEC+35XX
VW/SKODA/SEAT: Magotan/CC

  • 5 Generation Immo Audi A4L/A5/Q5 Audi A6/A7/A8
VW New Touareg

  • REMOTE

09 Central control

B5 Central door lock(KWP1281)

46 Central comfort module(kwp1281) 46 Central comfort module(Canbus)
  • Read PIN

17 Dashboard Jetta Passat Bora
Golf Sharan Polo Lavida 3.5
Sagitar 3.5 2007-, 2006

Touran 3.5

Caddy 3.5

VW 2007-

25 Immobiliser

01 Engine
OBDSTAR H110 cluster calibration car list:
Audi MQB 35XX 2014.06-
Audi A3 2014.06-
Audi Q2 2014.06-
(Note: continental and VDO dashboard are supported,  Chinese Johson and virtual cockpit are not supported.)
 
VW MQB 35XX 2014.06-
        GOLF SPORTSVAN 2014.06-
        GOLF7 2014.06-
        GOLF PASSAT B80 2014.06-
        GOLF POLO 2014.06-
        Tiguan 2014.06-
        Touran 2014.06-
(Note : Continental and VDO dashboard are supported, Chinese Johson and virtual cockpit  are not supported.)
 
Skoda MQB 35XX 2014.06-
          Skoda Fabia 2014.06-
          Skoda Rapid 2014.06-
          Skoda Octavia 2014.06-
          Skoda Superb 201.06-
(Note : Continental and VDO dashboard are supported, Chinese Johson and virtual cockpit are not supported.)
 
Seat MQB 35XX 2014.06-
          Seat IBIZA 2014.06-
          Seat TOLEDO 2014.06-
          Seat LEON 2014.06-
 (Note : Continental and VDO dashboard are supported, Chinese Johson and virtual cockpit are not supported.)
 
For more detailed supported vehicles of immobilizer and cluster calibrate, please refer to the car list attached.
OBDSTAR H110 Immobilizer Car List:
 
OBDSTAR H110 Cluster Calibrate Car List:
 
OBDSTAR H110 VAG-I+C is much cheaper than others: Update to NEC+24C64 (2014-) for 250 euro and update ENIGMA to MQB for 1000 euro.
 
OBDSTAR H110 VAG MQB IMMO Cluster tool for sale:

2017-12-24

Vpecker E4 Phone Diagnostic Tool User Guide (with many pictures)


You might still pay attention to Vpecker E4 Phone diagnostic tool. This post will help you to know more about it. The following contains the basic functions and special functions that you may use. Also, some using tips will be given below to show how convenience this Vpecker E4 Phone Diagnostic Scanner is.
This passage will take BMW diagnosis as an example.

Communication
Please connect VPECKER E4 with the car. After connection, the indication light turn on red.
Please check the connection of Bluetooth, if connect successfully, the indication light will turn to blue.
Run the VPECKER E4 APP and start to diagnose.



         Read ECU Information


         Read DTCs


         Erase DTCs


         Data List


Click the button       to start data recording, until to click the button  to stop recording:


Please chick the     button to select the data stream you want, click  the button, vertical screen will show the dynamic effect of data stream.


Click the button, horizontal screen will display dynamic effects of superimposed waveform for data stream.


Click the  button to change the waveform line color, you can select the color you like and click "OK" button.


         Active Test


         Special function

        
    How to Screenshot Vpecker E4 APP
Captures, saves and prints screenshots anytime and anywhere.


The screenshot files save at the path:
My file/ Internal storage/IDUTEX/U3/UserData/Screenshots


         How to Save Vpecker E4 diagnostic data
Using the saving function to generate the corresponding diagnostic report document for the vehicle diagnostic data, it greatly facilitates the diagnosis and management of the diagnosis and management of the diagnostic data.
Click the button  to save the diagnostic report .


Click the button     to view the diagnostic report , as the picture show:


         Screen Recording
Click the button to start the screen recording, click       again to stop the screen recording. Use the function to record VPECKER E4 APP operation and generate the
appropriate video files, The video can be checked in video management.


         Data Playback
You can quickly browse the video of the diagnostic data you have recorded here.


         Diagnose Function List
Click the ton to open the vehicle function list, you can quickly understand the supported models, systems and functions. As shown below:


         Feedback
The information of diagnostic software problems can be uploaded to the manufacture by this function. Once you have problem when using this Vpecker E4 APP, you could send the feedback to manufacture. It helps the engineers to fix the bugs quickly.

NOTE: With * information is required; the attachments size cannot exceed 8MB.
Here is a user manual for you to know more about Vpecker E4 APP version diagnostic tool:
http://www.eobdtool.co.uk/upload/pro/vpecker-e4-user-manual.pdf

Vpecker E4 sale in eobdtool:
http://www.eobdtool.co.uk/wholesale/vpecker-e4-phone-diagnostic-tool.html

2017-12-23

DTS Monaco and Vediamo Now Added to MB SD C4 V2017.12

The new version V2017.12 MB SD C4 Diagnostic tool is equipped with Vediamo and DTS Monaco Engineer Software Support Offline Programming. How does DTS Monaco and Vediamo software perform? What is the difference between them? Look ahead and you will know.

Super engineer software DTS Monaco is coming after the Vediamo Benz engineer software. It could do separate programming, scan entire vehicle software code, read entire vehicle setting code data and so on. It is truly to achieve on-button operation.

DTS monaco V8.03 Super Engineering Software


Vediamo  V05.01.00 Engineering Software


Here will compare two Mercedes-Benz engineer software : Vediamo vs DTS maonaco
Vediamo software can only read module single data, set code, authority is too low
DTS maonaco software is development by Mercedes Benz manufacturers ,all car data one click scan and save. Data can be directly change the underlying data, the module used directly copied data replacement.  Automatic programming, can automatically set code completely out of online operation.

DTS Monaco VS Vediamo
FunctionDTS MonacoVediamo
entire vehicle setting code one-click saveyesno
entire vehicle control unit software number one-click saveyesno
read entire vehicle fault codeyesno
data exchangeyesno
quick testyesno
single control unit one-click setting code offlineyesno
Offline programmingyesyes
Increase or decrease SA codeyesyes
Personalized settings control unit parametersyesyes
DTS-monaco introduction
1.DTS-monaco is the official software used by Daimler Benz development engineers
2.DTS Monaco is universal engineering test terminal for the diagnosis and control function of the vehicle controller, The name Monaco is derived from the modular analyzer used in vehicle traffic
3.DTS Monaco covers all the tasks in the field of engineering, testing and production test preparation
4.When Mercedes-Benz maintenance test it is the greatest authority,the perfect support for C4(SDconnect) and (Ecom) Hardware(at present, Das-xentry.Vediamo lower authority)

DTS-monaco special feature
1.Quick Test:Entire vehicle ECU quick test, and the test can choose to edit more
2.Variant Coding: Coding with variation add VO- delete VO function
3.ID identification :One click to read the whole car and save all modules programmed numbers
4.Complete Variant Coding: One time to read all the ECU coding vehicle data, can be written to the vehicle again, completely off-line operation
5.Diagnostic Services: Advanced features can see your choice of internal and external data module, turn on the computer authorization(not driving license), Activate ECU, reset ECU, modifying the original chassis number
6.Flash programming: Fully offline programming
7.Diagnostic Trouble Code: Diagnostic module DTC fault code
8.ECU Exchange: Two of the same ECU, by reading data import data exchange
9.Symbolic trace: Record and track the file, after repeated viewing, analysis of fault logic point


New V2017.12 MB SD Connect C4 now release on eobdtool.co.uk:
http://www.eobdtool.co.uk/wholesale/latest-version-mb-sd-connect-compact-4-star-diagnosis.html

2017-12-22

Vpercke E4 APP Version Diagnostic Tool Update Note

After IDUTEX released the new Vpecker E4 Android phone version,  it caught people's eye. As a phone diagnostic tool, it match the customer's requirement and would be the best choice for workshop and mechanics.
The following post will show the update note of Vpecker E4. The latest version is equipped  with more models,details show below:


CHRYSLER_V14.0
1.Added Version Info of all models.
2.Added Vehicle models up to 2017:

4C, B1-Renegade, BF-Fiat 500L, BK-Forza, BQ-Renegade, BU-Renegade,
CS-Pacifica, D2-Ram Truck, DD-Ram Truck, DF-Ram 3500 Cab Chassis 10K,
DJ-Ram Truck, DP-Ram Truck, DR-RAM, DS-Ram Truck, DV-Vision, DX-Ram Truck,
FB-500X, FF-500, HB-Durango, HG-Aspen, J8-Wrangler, JC-Journey, JF-Freemont, JK-Wrangler,
JS-Avenger,Sebring,Convertible/Sedan, KA-Nitro, KJ-Liberty, KK-Liberty, KL-Cherokee,
LA-Challenger, LC-Challenger, LD-Charger, LX-300,Charger,Magnum,Grand Voyager,
M1-551, M4-553, M6-556, MK-Compass,Patriot, MP-552, ND-Dakota, NM-Raider,
NY-Ypsilon, PD-Neon, PF-Dart, PM-Caliber, PT-PT Cruiser, R2-Mini-Van, R7-750, RM-Routan,
RT-Caravan,Town & Country, RU, UF-200, VB-Sprinter, VF-ProMaster, VM-ProMaster City,
WD-Durango, WK-Grand Cherokee, XK-Commander, ZB-Viper,
ZD-Viper (Post-2013), ZH-Crossfire(NAFTA).

BMW_V12.8
Add some service functions to the vehicle

MINI_V12.8
Add some service functions to the vehicle

ROLLSROYCE_V12.8
Add some service functions to the vehicle

LANDROVER_V13.7
Add Some DataList.
There is a Vpecker E4 phone version Introduction, click to view if you are interested:
http://www.eobdtool.co.uk/upload/pro/vpecker-e4-phone-service-instructions.pdf
If you have any questions please feel free contract us sales@eobdtool.co.uk 

2017-12-20

OBDSTAR H100 Ford Mazda is better coverage than OBDSTAR F100

OBDSTAR H100 Ford Mazda key programmer, the next-generation of OBDSTAR F100, is better coverage than OBDSTAR F100. OBDSTAR H100 can perform immobilizer function and mileage correction function on the newest Ford Mazda up to 2017/2018 year e.g FORD Pincode Free Matching  for New Mondeo/Edge/Taurus/Mustang/F150 2015- Models: Edge 2016+, F150 2015, Galaxy 2015+, Mondeo 2015+, Mustang 2015+ and Ranger 2016+, etc.
Here OBDSTAR H100 whole package: a high quality of main unit with display screen, one OBD main cable, one user manual and one TF card reader (used to update online). And the whole package only weights 0.22LB which is much easier to take.
OBDSTAR H100
OBDSTAR H100 Ford Mazda Landrover Jaguar coverage:
OBDSTAR H100 Ford Immo function list
OBDSTAR H100 Mazda Immo function list
OBDSTAR H100 Landrover Immo function list
OBDSTAR H100 Jaguar Immo function list
OBDSTAR H100 Ford mileage function list
OBDSTAR H100 Jaguar/Mazda/LandRover mileage function list

OBDSTAR H100 language available: English
OBDSTAR H100 update:
Click on OBDSTAR official site: http://en.obdstar.com/

OBDSTAR H100 Warranty: one-year warranty

OBDSTAR H100 for sale:
More expensive than OBDSTAR F100 because of its better coverage and new hardware chip.
http://www.eobdtool.co.uk/wholesale/obdstar-h100-ford-mazda-key-programmer.html

2017-12-12

OBDSTAR Toyota G H chip all keys lost test working great

Toyota G chip and H chip (American type and Middle East) ALL Keys Lost can be updated in OBDSTAR X300 Pro3 and OBDSTAR X300DP now.

Toyota G chip all key lost video:
OBDSTAR X300 DP PAD Do Toyota RAV4 with G ALL Key Lost programming

Toyota H chip all keys lost test reports with Video: Comming soon
Just now update your OBDSTAR X300 Pro3 and OBDSTAR X300DP. Guide: Step 1:  
  1. Remove the TF card from your device.
  2. Insert your TF card into computer.
  3. Format your TF card and ensure it is empty.
Step 2: Login our website: http://member.obdstar.com/MemberEn/Register.html and click "A Key upgrade"   
Step 3: Download and install the “One Key upgrade”. You will see this software.
 

Step 4: Open the “one key upgrade”. Input your username and password. Then select “End User” and click “Log in”.  

Step 5: Input your S/N.   
Step 6: Select all and click “Upgrade”.  

Step 7: Upgrade completed.

Step 8: Open your TF card. You will see these files.
Step 9: Remove the TF card from the computer. Insert your TF card into the device. OBDSTAR X300 Pro3 and OBDSTAR X300DP update succeeds! You could program Toyota G chip and H chip (American type and Middle East) ALL Keys Lost.