Lonsdor K518ISE

Lonsdor K518ISE
Lonsdor K518ISE

2018-08-27

FVDI J2534 software download, Windows 7 Install, PCB display

2018 FLY FVDI J2534 user manual:
What is FVDI J2534
What’s the FVDI J2534 inner look
FVDI J2534 software download
How to install FVDI J2534 on Windows 7
What protocols and cars can be supported
In detail...
What is FVDI J2534:
SAE J2534 is a standard for communications between a computer and a vehicle. Government regulations require all automakers provide a J2534 service to everyone in the U.S. for re-flashing emissions related controllers. FVDI J2534 is such a SAE J2534 Pass-Thru device that you can re-flash and, in some cases, diagnose vehicles with factory functionality.
2018 FVDI J2534 is the newest FVDI interface that will work with J2534 software, including Ford/Mazda IDS, Honda/Acura HDS, Toyota/Lexus/Scion Techstream, JLR SDD, Nissan/Infiniti Consult 3, Consult 3 plus, Consult 4, and FVDI 2015, FVDI 2018, VVDI2 software, Tango key programming software.
NOW, FVDI J2534 is confirmed to work with Honda HDS, Ford IDS and Toyota Techstream.
BUT, the other is being tested! FVDI J2534 will work with more J2534-based vehicles!

Whats the FVDI J2534 inner look:
FVDI J2534 PCB display


Where to download FVDI J2534 software:
You can download FVDI j2534 software http://flyobd.com/shop/download-center/ and FVDI J2534 software from the CD comes with the packet

Again, FVDI J2534 now is confirmed to only work with Honda HDS, Ford IDS and Toyota Techstream.
How to install FVDI J2534 on Windows 7:
FVDI J2534 installation requirement:

Works well on Windows 7 64 bits! Tested!
FVDI J2534 Ford IDS software installation tutorials:
Two steps... then done!
Install FVDI J2534 start software, then install the original vehicle software
Note: the software installation are not required installation sequence.
IMPORTANT:
The software cannot be installed in the same computer
If you want to use these software with the FVDI J2534 equipment, please install different software on different computers.

Step 1: download FVDI J2534 equipment software from compact disc(CD) l
Put the CD in the computer CD drive l
Wait for a while before opening the CD in the resource manager,you will see the equipment related software and resources.

Step 2: download FVDI J2534 equipment software from the official website download link l
Go to http://flyobd.com/shop/download-center/
Please register and log in l
Download FVDI-J2534-FM (FM,Short for Ford and Mazda) l
Download IDSFord or IDSMazda

Download the latest release IDS software and save it to the local.

Step 3: Install the latest IDS software l
Double-click on the “IDS-110.01_Full.exe” to start installation l
Select language,and click on “next” button

Select “i accept the terms of the license agreement”

Reboot your computer after installation

Step 4: Install the FVDI J2534 software l
Open compact Disc and find FVDI-J2534 software and double-click on the “FVDI_J2534_Ford_Setup.exe” software

Setup FVDI J2534 language

It will install SVCI Based software list, Click on “next” directly, and then Click on “next” all the time until it jump a window “Select Setup Language”, which is selected the device driver’s installation language

Install the FVDI J2534 driver,and click on “Next” all the time until install Shield wizard complete, and then click on “finish”.

When you open FVDI J2534 for ford software after installation, an error window will pop out. That means you have not connect FVDI J2534 equipment with your computer, as show in the below. connect your device with computer,and the FVDI J2534 software will be opened normally.

when you put FVDI J2534 equipment to connect the computer and open the software, it will pop below error message, it means you do not connected vehicle ECU module and the ECU voltage can not less than 8 volts. After using the OBD interface of FVDI J2534 to connect the ECU,and the software can be opened normally and put into use.

Note: DO NOT open the IDS software on the desktop directly!
it is advised to delete the IDS software shortcut on the desktop.

FVDI J2534 Vehicle List:
- Vehicle Protocols:
ISO9141
ISO14230
J1850 VPW
J1850 PWM(Ford SCP)
ISO11898 HS(500K BPS)
ISO11898 MS(125K BPS)
ISO15765 HS(500K BPS)
ISO15765 MS(125K BPS)
FEPS(Flash EEPROM Program Signal)
Honda SCS
Honda DIAGH KWP1281 J2819(TP2.0)
- Supported software for J2534:
Ford IDS V110
Mazda IDS V108 Toyota TIS V13.00 Honda HDS V3.102
Land Rover/Jaguar SDD2 V153
Nissan CONSULT III plus R2R V80.11
- Supported software for ELM327:
ELMconfig
Forscan
FOCCCUS
FF2

2018-08-19

Opel key programmer: OBDSTAR H111, Commander for OPEL VAUXHALL 5.9, Opcom

Opel key programmer clone and original options: OBDSTAR H111, Commander for OPEL VAUXHALL 5.9, Opel Opcom. This post is about what they can do, how to do, the price etc.

1. OBDSTAR H111 Opel key programmer via OBD


OBDSTAR H111 functions:
Opel key programming via OBD
Opel cluster calibration via OBD
Read PIN Code from BCM automatically and manually

OBDSTAR H111 car list
1.  For IMMO
OPEL V30.21

    OPEL

        Read security code

            By BCM System

                Auto

                Manual

            By Other System

        Immobiliser

            Select from vehicle

                Agila

                    2000-2008

                Agila B

                    -2009

                    2009-

                Antara

                Astra

                    1995-2004

                Astra F

                    1995-2004

                Astra G

                Astra H

                    Immobiliser

                    Smart key system

                Astra J

                Astra K

                Calibra

                    1995-1998

                Cavalier

                    1995-2004

                Cascada

                    2013

                Combo

                    1998-

                    2012

                Corsa-B

                    1995-2006

                Corsa-C

                    1995-2006

                Corsa-D

                    2005-

                Corsa-E

                Frontera

                    1998-

                Insignia

                Meriva-A

                Meriva-B

                Mokka

                Monteray

                    1996-

                Movano

                    1998-2001

                    2005-2010

                    2010-

                Omega

                    Type 1

                    Type 2

                Signum

                Sintra

                    1997-1998

                Tigra

                    1995-2002

                VX220

                Vivaro

                    2002-2014

                Vectra

                    1995-2002

                Zafira-A

                    1995-2006

                Zafira-B

                    1995-2005

                    2005-

            Select from type

                Type 1

                Type 2

                Type 3

                Type 4

                Type 5

                Type 6

                Type 7

                Type 8

                Type 9

                Type 10

                Type 11

        Remote

            Astra-H

            Combo

            Corsa-D

            Meriva

            Zafira-B

            Vectra-C/Signum

    Oldsmobile

        Immobilizer

            Aurora

                2001-2003

            Silhouette

                2001-2003

2). for Cluster Calibration
Astra 2010
Combo 2015
Insignia 2010
OBDSTAR H111 Update:
on the official site: www.obdstar.com

OBDSTAR H111 Language:
English & Chinese

How to use OBDSTAR H111?

OBDSTAR H111Price:
€120 in total


2. Commander for OPELVAUXHALL 5.9
The following parts are quoted from
https://www.keyprogtools.com/opel-vauxhall-key-programming-tools-smart-key
Commander for OPEL/VAUXHALL is a professional software for diagnostic of Opel/Vauxhall vehicles.
 It is capable to perform a diagnostic of any unit, which operates under one of the following protocols:
 Keyword 82, Keyword 2000 and GMLAN. It provides some unique functions, which are not supported by any other diagnostic tool.
Full compatibility with GM - Tech2Win diagnostic software
Standard diagnostic functions:
  • For all electronic control units reading identification data
  • For all electronic control units read error (DTCs)
  • For all electronic control units clear error (DTCs)
  • Device scan
  • Data Display / Measured values
  • Security code programming
  • Vehicle identification programming
  • Injector programming - Diesel engines
  • Programming of the CAN configuration
  • Program immobilizer function
    - Adaptation of Engine Control Module to immobilizer
    - Adaptation of Immobilizer to the vehicle
  • Program immobilizer outputs
    - Enable/Disable Anti Theft Warning system
Special functions:
  • Key programming
- supported all models for programming of keys and remote controls by OBDII - ASTRA J, INSIGNIA, Chevrolet CRUZE and all older ..
-
Read mechanical key number
  • Read security code
    - With a new special function ON008 you can read Security code from all Opel/Vauxhall vehicles with CAN BUS by OBDII - Astra H, Corsa D, Vectra C, Zafira B, Agila B, Insignia
    - Read security code PSG16 (Y20DTH, Y22DTR) - Astra G, Zafira, Vectra C
    Read security code Simtec 70(X18XE1,X20XEV); Simtec 71(Z22XE); Simtec 75(Z16XER, Z18XER); 
    Delco HSFI 2.4 (Z16XEP); Denso (A17DTR) 
  • Read/Write EEPROM
    - Magneti Marelli 1.3 16V CDTI (Z13DT) - Agila, Corsa C, Tigra B
    - SIMTEC71.1(Z18XE,Z18XEL) - Astra G, Corsa C, meriva, Tigra B, Vectra B, Zafira
    - Read eeprom of the instrument Panel Cluster of Astra G, Corsa C, Meriva, Tigra B
  • Odometer correction
    Odometer correction - Insignia, Astra J, Chevrolete Cruze by OBDII
    - Odometer correction - Movano B - Instrument Panel by OBDII
    - Odometer correction in EDC16 - 1.7;1.9 by OBDII
    - Odometer correction ANTARA - EDC16 by OBDII
    - Odometer correction in ECU - Bosch ME7.6.2, Delco MT35E
    - Odometer correction PSG16 (Y20DTH, Y22DTR) - Astra G, Zafira, Vectra C
    - Instrument Panel Cluster - Astra G; Corsa-C; Meriva; Tigra-B; Vectra-B. NOT SUPPORT TRW IPC!
  • Engine Flasher 
    - Read/Write flash memory from ECU - Simtec 70, Simtec 71, Delco HDRC, Marelli MJD 602, Motronic 7.6, Delco MT35E
  • Radio
    - Read radio code by OBD from Delco CDR500
  • Airbag
    - Erase crash data by OBD - Airbag SAB6 - Siemens with MCU Motorola HC11
  • Dump Tool
    - Airbag TEMIC Astra G, Corsa C (68HC908AZ32) - clear crash data
    - SIEMENS (68HC11E9) GM 24416701 DJ - clear crash data
    - Read immobilizer II (TMS) security code from dump
    - Bosch EDC16 odometer correction
    - Magneti Marelli odometer correction
    - Astra G, Astra H, Corsa D instrument panel odometer correction
Advanced functions:
  • Security access
  • Custom request - manually transmission of messages to a unit (KWP82/KWP2000/CAN)
  • Custom query:
    - read memory by address - possibility to read/program memory of electronic control units
    - scanning of a unit memory space - automatically discover of all accessible memory
Supported vehicles:
  • Astra J - 2010+
  • Insignia - 2008+ (updated supported units)
  • Agila - 2000-2007 year
  • Astra F - 1992-2001 year
  • Astra G - 1998-2009 yer
  • Astra H - 2004+
  • Tigra - 1995-2000 year
  • Tigra B - 2004+
  • Vectra B - 1996-2001 year
  • Vectra C/Signum - 2002+
  • Corsa B - 1993-2001 year
  • Corsa C - 2001-2008 year
  • Codsa D - 2007+
  • Meriva - 2003-2008 year
  • Zafira - 1999-2005 year
  • Zafira B - 2005+
  • Omega B - 1996-2003 year
  • Frontera - 1997-1998 year
  • Frontera B - 1999-2004 year
  • Calibra - 1990-1997 year
  • Vivaro - 2001+
  • Movano - 2004+
Prices of the special functions: 

ON007Compatibility AVDI with Tech2Win (Dealer level diagnostic) free
ON008 - Read security code + Key learning 960 euro 
ON009 - Mileage recalibration - Instrument cluster,ECU,Airbag - clear CRASH data, Radio - reading PIN code- 197 euro 
ON010 - Engine Flasher - 197 euro 
ON011 - Advanced key programming/ASTRA J, INSIGNIA, Chevrolet CRUZE/ - 480 euro
ON012 - Mileage recalibration 2-Insignia, Astra J, Chevrolet Cruze by OBDII - 288 euro
FULL - all special functions - 2122 euro 
3. Opcom Clone Opel diagnostic tool
Opcom Clone can support a little part of Opel key programmer, you can Google and find little operation guide on how to use Opcom Clone to do Opel key programming. and there is little feedback on what it can do.

To sum up:
OBDSTAR H111 wins in best price and wide Opel coverage.
Commander for Opel / Vauxhall 5.9 wins in powerful function and corresponding high price.
Opcom can do little Opel key programmer, it is good at OBD diagnosis.



2018-08-15

Multiflasher OBD ECU programmer for Hyundai kia Function List

Multiflasher Ecu programmer for Hyundai kia via OBD is a combination of  one Tactrix Openport 2.0 plus one USB dongle plus (or the software is compatible with other J2534 device. Multiflasher can read ECU data, write ECU data and do calibration, it plays an important role in the power upgrade.
Before flashing and after reading the program checks the firmware and checksums, and corrects them if needed. It allows to avoid flashing incorrect dumps or to make sure that reading is correct. It contains a function of errors reading, decoding and reset with a possibility to manually add and edit their description.

Multiflasher ECU programmer Function list:
•Bosch M(G)7.9.8. Only FLASH memory writing through the OBDII. Vehicles: KIA/Hyundai i10, i20, i30, Accent (Verna), Elantra, Pikanto, Rio, Ceed, Cerato, Soul, etc with 1.4L, 1.6L engines and a mechanical accelerator pedal.

•Siemens SIMK-31/41/43, SIM2K-47. FLASH memory reading and writing through the OBDII. Vehicles: KIA/Hyundai Coupe, Elantra, SantaFe, Sonata, Tiburon, Tucson, Ceed, Cerato, Sportage, etc with 2.0L and 2.7L engines.

•The set of modules: Siemens SIM2K-140/141/142/341/D160. FLASH memory reading through ECU connector and flashing through the OBDII. Vehicles: KIA/Hyundai Carens, Cerato new, Magentis, Sonata, Sorento, Sportage new, ix35, etc with 2.0L and 2.4L engines, and Chevrolet Epica with 2.0L and 2.5L engines. Siemens SIM2K-241/242/245/С201. Reading and flashing through the OBDII diagnostic link connector. Supports GDS format. Vehicles: Elantra MD 1.8, Sonata new, i40 2.0, ix35 new, Ceed new, Cerato new, Optima new, etc., SsangYong Actyon 2.0, Korando.

•BSL TriCore. Reading and flashing of ECU internal and external FLASH/EEPROM memory with Infineon TriCore TC1724, TC1728, TC1738, TC1762, TC1766, TC1767, TC1782, TC1792, TC1793, TC1796, TC1797 processors in BSL mode. The approximate short list of supported ECUs BOSCH M(E)17.9.7 (VAZ/UAZ), and ME17, ME (D, G)17, EDC17 (AMG, Audi, BMW, Citroen, Honda, Hyundai, KIA, Land Rover, Mercedes, Mini, Peugeot, Porsche, Renault, Saab, Skoda, Toyota, Volkswagen, Volvo).

Special functions:
- checksum and BOSCH digital signature verification/recalculation, Siemens/Continental SIM2K 240-245 checksum  verification/recalculation;
- protection passwords reading: BOSCH TPROT 8-10 VAG, TPROT 11-13 KIA/Hyundai, TPROT 12 M(E)17.9.71 ВАЗ/УАЗ, GPT (a special adapter is needed) и Siemens/Continental SID208 Ford, EMS2204 Ford, SIM2K-24x KIA/Hyundai/SsangYong/Chevrolet;

- BOSCH and Siemens/Continental SIM2K 240-245 maps import;

- protection disabling in BOSCH M(E)17.9.71 VAZ/UAZ.

•Bosch M(E)17.9.7. Only ECUs FLASH memory writing of VAZ/UAZ vehicles through the OBDII.;

•Set of modules M(E)17.9.7. Only ECUs FLASH memory writing of VAZ/UAZ vehicles through the OBDII. Special functions: IMMO OFF without opening the ECU. Only ME17.9.7 VAZ!!! Bosch M(E)17.9.71 VAZ/UAZ OBD. For flashing factory files in any ECUs, and tuned files to ECUs with disabled protection (in BSL mode). Special feature - ECU protection state definition;

•EDC17C08/CP14 KIA/Hyundai. Only FLASH memory writing through the OBDII. Vehicles: KIA/Hyundai Ceed 1.6 CRDI, IX35 2.0 CRDI, SantaFe 2.2 CRDI, Sorento 2.2 D, Soul 1.6 D, Sportage 1.7 CRDI / 2.0 CRDI, etc.;

•Bosch ME 17.9.11/12/13. FLASH memory reading and flashing with factory and tuned files through the OBDII. Supports GDS format. Vehicles: KIA/Hyundai with 1.4L, 1.6L engines and an electronic accelerator pedal;

•Bosch M(E) 7.9.7(+). Only FLASH memory writing of M7.9.7, M7.9.7+ and ME7.9.7 controllers installed in Korean and Chinese vehicles through the OBDII, and in Russian vehicles through the ECU connector. Supports SMS-Software compressed format. ME7.9.71 support will be available soon.

•Siemens EMS2204. Only writing FLASH memory writing with factory and tuned files through the OBDII. Supports VBF format. For Ford Focus III with a 1.6L engine.

•Delphi DCM 3.7 SsangYong. FLASH memory reading and writing through the OBDII, all checksums verification, checksum verification and correction for maps area.



Before flashing and after reading the program checks the firmware and checksums structure, and recalculates them if needed. It allows to avoid flashing incorrect dumps or to make sure that reading is correct. It contains a function of errors reading, decoding and reset with a possibility to manually add and edit their description.
Adapter settings selection:


Errors reading and reset:
All the modules function through OpenPort 2.0 or any other J2534 device, including K-line protocol. There is no need for additional adapters.
Package
Software
USB-dongle.

Multiflasher modules:

Bosch M(G)7.9.8 
Only FLASH memory flashing through the OBDII diagnostic link connector.
Siemens SIMK-31/41/43, SIM2K-47 
FLASH memory reading and flashing through the OBDII diagnostic link connector.

Set of Siemens SIM2K modules 
Siemens SIM2K-140/141/142/341/D160. FLASH memory reading through ECU connector and flashing through the OBDII diagnostic link connector. Vehicles: KIA/Hyundai Carens, Cerato new, Magentis, Sonata, Sorento, Sportage new, ix35, etc with 2.0L and 2.4L engines, and Chevrolet Epica with 2.0L and 2.5L engines. Siemens SIM2K-241/242/245/С201. Reading and flashing through the OBDII diagnostic link connector. Supports GDS format. Vehicles: Elantra MD 1.8, Sonata new, i40 2.0, ix35 new, Ceed new, Cerato new, Optima new, etc., SsangYong Actyon 2.0, Korando.

BSL TriCore 
Reading and flashing of ECU internal and external FLASH/EEPROM memory with Infineon TriCore TC1724, TC1728, TC1738, TC1762, TC1766, TC1767, TC1782, TC1792, TC1793, TC1796, TC1797 processors in BSL mode. The approximate short list of supported ECUs BOSCH M(E)17.9.7 (VAZ/UAZ), and ME17, ME (D, G)17, EDC17 (AMG, Audi, BMW, Citroen, Honda, Hyundai, KIA, Land Rover, Mercedes, Mini, Peugeot, Porsche, Renault, Saab, Skoda, Toyota, Volkswagen, Volvo). Special features of the module: - verification/recalculation of checksums and BOSCH digital signature, Siemens/Continental SIM2K 240-245 checksums verification/recalculation; - protection passwords reading for BOSCH TPROT 8-10 VAG, TPROT 11-13 KIA/Hyundai, TPROT 12 M(E)17.9.71 VAZ/UAZ, GPT (a special adapter is required) and Siemens/Continental SID208 Ford, EMS2204 Ford, SIM2K-24x KIA/Hyundai/SsangYong/Chevrolet; - import of BOSCH and Siemens/Continental SIM2K 240-245 maps; - protection disabling in BOSCH M(E)17.9.71 VAZ/UAZ.

Bosch M(E)17.9.7 OBD -
Bosch M(E)17.9.7 OBD. Only VAZ/UAZ FLASH memory flashing through the OBDII diagnostic link connector. Special features: IMMO OFF without opening the ECU. Only for ME17.9.7 VAZ!!! Bosch M(E)17.9.71 VAZ/UAZ OBD. Only VAZ/UAZ FLASH memory flashing through the OBDII diagnostic link connector. Factory files can be written without any limitations, tuned ones – only to the prepared ECUs (in the BSL mode). Another special feature: defining the ECU protection state.

Bosch EDC17C08/CP14 KIA/Hyundai 
Only FLASH memory flashing through the OBDII diagnostic link connector.
Set of Bosch ME 17.9.11/12/13, Bosch MED(G) 17.9.8 and Bosch ME(G) 17.9.21 
Only FLASH memory flashing through the OBDII diagnostic link connector. For factory and tuned files!

Siemens EMS2204 
Only flashing of tuned and factory files through the OBDII diagnostic link connector. Supports VBF format. For Ford Focus III with a 1.6L engine.

Delphi DCM 3.7 SsangYong 
Firmware reading and flashing through the OBDII diagnostic link connector, all dumps checksums verification, maps checksums recalculation.